helen@nailsworth.eclipse.co.uk 01684 274758


  HANDRAILS
 
 
Click images
to view larger
 
 

We have made a name for ourselves in the water industry largely from our ability to manufacture bespoke handrails appropriate to specific applications.

Handrail legs are manufactured in house, so we can turn around required specials in a very short time (i.e. those with legs at specific angles for sloping walls, or with varying rail and height centres).

All of our handrails are bent from self-colour tube (often with as many as 6 bends in one piece of tube), drilled for venting and then galvanised to BS EN 1461 (galv 70 microns thick). This has a much greater protection/life span in comparison to BS EN 1387 pre-galvanised tube (20/30 microns of zinc) which is often seen being bent on site, and which will rust away in a sewage works environment (see picture above).

By site surveying and then bending the tube in our workshop we ensure that any bends in the run serve to strengthen the handrail, not weaken it, as is often the case when large amounts of short handrail sections with only one bend per piece are used.



Designed & hosted by:
HOME | HISTORY | DESIGN | FABRICATION | HANDRAILS | MANHOLE LADDERS | INSTALLATION | GALLERY | CONTACT